Virgin Pet Granules /Polyethylene Terephthalate for Mineral Water Bottles Pet

Basic Info

Model NO.	JZ PET
Carrier	PET
Color	White
Certification	ISO
CAS No.	25038-59-9
Formula	(C10h8o4)N
Einecs	25038-59-9
Material	Polyethylene Terephthalate/Pet
Usage	General Plastics, Engineering Plastics, Specialty
Plastic Properties After Heated	Plastic Properties After Heated
Customization	Available
Transport Package	25kg PP Woven Bag, or Per Your Requirement.
Specification	Granules
Trademark	JZ
Origin	Hebei, China
HS Code	3204170000
Production Capacity	50000t

Product Description

PET Resin

PET Resin is cream or pale-yellow crystal, with smooth and shiny surface. Resistance to creep deformation, fatigue resistance, abrasion resistance and dimensional stability are perfect. Small wear and tear but high hardness, its toughness is the largest in thermoplastic. The electrical insulation of PET is perfect and little be affected by temperature, however, poor corona resistance. PET is non-toxic, weather resistance, and anti-chemical stability is very good. PET is low water absorption, resistance to weak acids and organic solvents. Intolerance of hot water immersion and alkali.

Feature

1.Oil resistant, fat resistant, acid resistant, alkali resistant, resistant to most solvents.

2.Excellent resistance performance of high and low temperature.

3.Non-toxic, tasteless, health and safety.

4.Transparent, UV blocking, good glossiness

It has the characteristics of good heat resistance, low moisture absorption, good chemical and weather resistance, good electrical properties, high dielectric strength and dimensional stability.

It also has unique characteristics, such as low crystallization degree, good performance for processing, and environment-friendliness.
Product Parameters

PET IV 0.80 +/- 0.02 - For Water Bottle / PET Sheet
PET IV 0.82 or 0.83 +/- 0.02 - For Edible Oil Bottle
PET IV 0.84 or 0.85 0r 0.86 +/- 0.02 - For CSD Bottles
PET IV 0.76 or 0.78 +/- 0.02 - For Hot Fill Bottle / Water Bottle

Parameter	Unit	Grade 1	Grade 2	Grade 3
I.V.	dL/g	0.800 ± 0.020	0.840 ± 0.020	0.860 ± 0.020
DEG	%	1.40 ± 0.30	1.40 ± 0.30	1.10 ± 0.30
- COOH	mmol/kg	≤ 35	≤ 35	≤ 35AA
AA	ug/g	≤ 1.0	≤ 1.0	≤ 1.0
Color value , L	/	≥ 80	≥ 80	≥ 70
Color value , B	/	≤ 1.0	≤ 1.0	≤ 1.0
Powder	mg/kg	≤ 100	≤ 100	≤ 100

 

Application

PET CR-8816 is for packing bottles, like pure water, natural mineral water, distilled water, drinking water

PET CR-8863 is for small-package edible oil bottles, liquor bottles, medicine bottles, cosmetics bottles, PET sheets

PET CR-8839 is for hot-filling bottles, like tea drinks, fruit-juice drinks and other medium type drinks

PET CR-8828 is for carbonated drinks bottles and 3-gallon, 5-gallon big bottles

PET CR-8828F is fast reheat chip for packing bottles of carbonated and soft drinks.

1. Various types of food, medicines, non-toxic sterile packaging materials; Textiles, precision instruments, electrical components, high-grade packaging materials; Tapes, videotapes, film, computer floppy disk, metal coating and the substrate such as photographic film; Electrical insulation materials, capacitor film, flexible printed circuit boards and membrane switch and other electronics and machinery.

2. Package bottle: From the initial development of carbonated beverages to the present beer bottles, cooking oil bottles, condiment bottles, medicine bottles, cosmetic bottles.

3. Electric products: Manufacture of connectors, coil winding tube, integrated circuit case, capacitor, transformer enclosure, TV accessories, tuners, switches, timer cover, auto fuses, motor bracket, and relays.

4. Auto Parts: Such as distribution panels cover, ignition coils, valves, exhaust parts, distributor cap, casing measuring instruments, small electric motor housings, etc., can also be a good use of PET coating, surface gloss and rigidity, making the car exterior parts.

5. Machinery and equipment: Manufacture of gears, cams, pump housing, pulleys, motor frames and watch parts, can be used as the microwave oven baking, a variety of roof, outdoor billboards and models.

6. PET Plastic molding can be injection molding, extrusion, blow molding, coating, bonding, machining, electroplating, plating, vacuum metallization, printing.

Our products can satisfy your material requirement of sheet, film, yarms, bottle, box and others.

1.Packaging & Shipping
25kg/bag,1100kg/jumbo bag or per your requirement.22mt/20'FCL2.Storage:The resin should be stored in a drafty, dry warehouse and away from fire and direct sunlight. It should not be piled up in the open air.3.Transportation:During transportation, the product should not be exposed to strong sunlight or rain and should not be transported together with sand, soil, scrap metal, coal or glass. Transportation together with toxic, corrosive and flammable substance is strictly prohibited.
Transport: By sea
By airport
By express
Package: 25Kg/Bag About us
Jiangzhi Import and Export Trade . Our company is located in Shijiazhuang City, Hebei Province, China.We can supply PP, PC, ADS and other plastic raw materials and rubber.Headquartered in Xingtai City, Hebei Province, China, the company is a large rubber and plastic production enterprise.Our advantage is to have experienced foreign trade team and strong production capacity and supply capacity.We can accept t/T, L/C, Weston through transport and other different terms of payment.We can supply different types of plastic raw materials and rubber.our product
FAQ

1. What is your terms of packing?Generally, we pack our goods in carton with pallet.

2.What is your tems of payment?T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.

3. What is your terms of delivery?EXW, FOB, CFR, CIF,L/C at sight

4. How about your delivery time?Generally, it will take 21 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

5. Can you produce according to the samples?Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

6. What is your sample policy?We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.

7. Do you test all your good before delivery?Yes, we have 100% test before delivery.